Excursion Report: 68th American Physical Society Division of Plasma Physics

Self-consistent Debris Charging and Soliton Generation
Bryan Lin (presenter), Adnan Mansour, Christine Hartzell
Chicago IL, 11/03/26


The purpose of this project is to validate the usage of ion acoustic solitons for sub-centimeter LEO (Low Earth Orbit) orbital debris detection. Thus far, simulations have modeled debris as an external, fully-charged source, and, consequently, have not captured interactions between the debris and ambient plasma, including how fluctuations in the debris charge change the behavior of the solitons. The purpose of this poster is to demonstrate progress in immersing a solid boundary inside fluid in a 2D five moment fluid model. Fluxes traveling into the solid can then be calculated, allowing for self consistent charging of the debris.
The debris is first defined as a polygon whose vertices are defined as intersections between an arbitrary circle and the cartesian grid. This polygon then modifies cells geometry, hence the name “Cut Cell”, introducing fluxes that travel through cut into cell interfaces. These resulting fluxes are scaled by the length/area of the new cell interface. To find fluxes traveling into the surface, inverse distance weighting and barycentric interpolation is performed.
To maintain a sufficient CFL condition without drastically decreasing the timestep, cells whose centers are immersed in the debris, called negative cut cells, are merged with a neighboring fluid cell.
Two tests were run to validate the cut cell implementation. First, debris is immersed in still plasma. Because the debris is a symmetric polygon, the resulting potential is also symmetric. The debris becomes negatively charged as electrons travel faster than ions. Note that this simulation was not run until full saturation. Results shown in figure 3.
Next, debris is immersed in moving plasma, with a mach number of 1.1. An ion density buildup can be observed, which appears to be the initial formation of a pinned soliton. Results shown in figure 4.
Future work should implement debris drag (through a momentum integral), flux reflection, and, eventually, 3D and more complex geometries.

Some questions I got:
What are the fluxes being calculated, and how do they charge the debris?
Mass, momentum, and energy fluxes are calculated through conservation of each of these properties. Mass flux charges debris.

How are cells merged?
Negative cells are merged according to the dot product between the circles’ radius vector and the surface vector of the portion of the debris inside the negative cell.

At sufficiently high speeds, could the debris experience EM effects?
I don’t know

Why doesn’t figure 3 demonstrate full rotational symmetry?
Because cut cells are not all the same area. As the mesh fineness increases, we approach full rotational symmetry. In other words, it’s a mesh artifact.

Do you have a hypothesis as to whether or not a self consistent, 3D fluid model will yield solitons?
I would guess no, as 3D self consistent PIC (particle in cell) models don’t see solitons [1]. PIC models are generally higher fidelity than fluid ones.

How do you know that ion density buildup in figure 4 is a soliton as opposed to some other wave?
We don’t know.
Then how do you know the waves that are generated are solitons at all?
Because solitons by definition are able to persist without losing shape or amplitude. Only a soliton could travel meaningful distance in the domain without dissipating. In other words, if a wave travels far, it must be a soliton.

How would a debris that is spinning be incorporated into this model?
Currently, the debris actually doesn’t move; instead, the plasma moves. As a result, in order to get the effect of the debris spinning, we’d need to make the plasma move around the debris, like a vortex. Not sure how that’d affect the solitons.

In figure 3, the potential is negative, but is it the correct amount of negative? (i.e. is the magnitude of the voltage correct?)
I don't know

Do you plan on implementing multiple debris in one simulation?
Yes, multiple boundaries in one simulation is an eventual end goal. Each boundary would cut into the mesh on their own. Note that, because solitons are wave, they superpose (add together), so I'd expect the solitons generated by two debris to have greater amplitude
Poster

[1] Sam, A., Kumar, P., Fletcher, A. C., Crabtree, C., Lee, N., & Elschot, S. (2025). Nonlinear evolution, propagation, electron-trapping, and damping effects of ion-acoustic solitons using fully kinetic PIC simulations. Physics of Plasmas, 32(2).

Last modified: 4 November 2026